
We have all experienced this struggle: After using your techsource mouse pad for a while at your workstation or gaming setup, it has developed dust, filth, and stains due to the abuse you have given it. Although you might be tempted, most manufacturers advise against cleaning it because it can harm the fabric and shorten its lifespan.
What is the best approach to maintaining a tidy desk and a mouse that is easy to use? Several options are available, depending on the circumstances. Continue reading to learn how to clean a techsource mouse pad!
Taking Care of a Techsource Mouse Pads
All types of techsource mouse pads can be hand-washed to get stains out. (Remember that you shouldn’t use a tech mousepad for this as you risk damaging the electrical components.)
What you’ll require
- Hot water
- Mild shampoo or soap
- Tidy sponge
- Supple-bristled brush
- Towel
Actions to Take with Tech Source Mouse Pad
- Place the tech source mouse pad in warm water in a sink, tub, or container.
- Apply shampoo or dish soap on the mousepad and scrape it with the sponge. As an alternative, first, moisten the sponge with soap before scrubbing.
- To remove any more challenging stains or oils, use a brush. (A hard-bristle brush or wire sponge should not be used for this since you risk damaging the mousepad.)
- Once you’re done cleaning, thoroughly rinse the mousepad to remove any soap residue.
- Ideally, leave the tech source mouse pad on a towel with the cloth side down overnight to dry. To assist in draining extra moisture, put it close to a fan.
- Although most manufacturers don’t advise them because they can reduce the lifespan of your mouse pad, you can use sprays, wipes, and other cleaning supplies to disinfect surfaces. If so, make sure to thoroughly read the labels before using them.
Read More: Most Popular Purple Cartoon Characters
How to Clean a Hard Mousepad
Compared to soft mousepads, hard mousepads with less porous surfaces are easier to clean because you can wipe them down without worrying about scratching the surface.
What you’ll require
- A microfiber cloth
- Sanitizing wipes (optional)

Actions to Take
If your techsource mouse pad has USB ports, unplug it before cleaning.
- Spray screen cleaning onto the techsource mouse pad or a piece of microfiber cloth. A corner of the cleaning cloth can also be dipped in rubbing alcohol, but carefully wring it out before washing.
- Concentrate on cleaning off any apparent dirt or grime from the mousepad’s surface as you wipe the surface clean.
- If you want to eliminate all the germs, use a disinfectant wipe afterward.
- Let the techsource mouse pad completely air dry after wiping away any additional moisture with a dry cloth.
How to Clean an RGB Mousepad
Cleaning a wired RGB mousepad is different. Here, it would help if you used extra caution to prevent harm to the electrical parts.
What you’ll require
- Shampoo or dish soap
- Using a microfiber towel: How To Do It
- Unplug the mousepad and relocate it away from other electronic devices before cleaning.
- Dab a tiny bit of dish soap or shampoo on the corner of a microfiber cloth before dipping it in warm water.
- Carefully squeeze and wring out the fabric to stop water from entering any ports.
- Use the cloth to clean every area of the mousepad’s surface thoroughly.
- To get the soap off the microfiber cloth, rinse it.
- Now clean the mouse pad of any residual soap with the damp towel.
- Allow the mousepad to dry face down on a towel once clean.
Can You Wash a Mousepad in the Washer?
Although manufacturers advise against using a washing machine to clean a soft or fabric mousepad, if yours is made from any of the following materials, you can do so without risk:
Materials for mouse pads include polyester, acetate, nylon, microfiber, rubber, acrylic, and polyurethane. They are also machine-washable.
Actions to Take
- Put your mousepad and a small amount of soap or gentle detergent in the washing machine.
- Add a tiny bit of light detergent or soap.
- Set the washer to a low, cold spin. Avoid using hot water since the heat could harm the rubber backing.
- Instead, switch to a gentle cycle.
- Never use bleach.
- The mousepad should then be air-dried. Wait 24 and 36 hours before using the product again for the best effects.
- The outcomes could differ depending on the type and caliber of the mouse pads. Contact the manufacturer to find out if it’s safe for a washing machine if you need clarification. Washing a mouse pad by hand is preferable because a mouse pad with a custom-printed design could be destroyed in a washing machine.
Can a Mousepad Go in the Dryer?
It’s advised to avoid drying soft or fabric mouse pads in a dryer. A dryer can harm the rubber backing of the place because it needs heat to function. The safest approach to dry a fabric mouse pad is to use a towel or let it air dry over time. You should buy an extra mouse pad if you need to use one in the interim.
How Often Should a Mousepad Be Cleaned?
Maintaining a regular cleaning routine for your techsource mouse pad should keep it clean and enable easy mouse movement. Generally speaking, cleaning your mousepad three to four times a year is at least beneficial. But, if there is a spill or other mishap, clean it immediately.
Also Read: Fix: Why Does Youtube Keep Switching to Light Mode
You can use a pattern if you want to:
- Once a week, clean the surface by wiping it down with a moist towel.
- It should be thoroughly cleaned every two months.
- Simple Cleaning Techniques
- A techsource mouse pad doesn’t need to be thoroughly cleaned every time. If you believe a fast touch-up would suffice, heed these recommendations:
Simple Methods for Cleaning Mouse Pads
- Use a hand vacuum to remove dirt and debris from a soft pad.
- Use a microfiber towel or disinfectant wipe to clean dust from a metal or plastic pad.
- Make use of a compressed air duster to blow away clutter.
- On a soft pad, apply a fabric protector to repel fluids and stop stains.
As well as Don’ts
Now that you know how to clean a techsource mouse pad, consider these further suggestions:
- Instead of using soap or shampoo on a stain, sprinkle some baking soda on it.
- Use cold water to rinse.
- Let it air dry for at least a day.
- With consideration for the material, decide whether you can wash it.
- Please don’t put it in the dryer, microwave, or dishwasher.
- Too much time I was spent outside in the sun.
- Apply a hair dryer.
Conclusion
If your mousepad gets dirty from spills, stains, or dust, you know how to keep clean your techsource mouse pad. Follow up the odyse online for more information!